Payment & Shipping Terms:
|Main Material:||Natural Rubber||Position:||Rear|
|Other Names:||Air Spring Bag||Weight:||0.1 Kg|
|Car Make:||Audi||OEM:||95535872000, 95535872002|
Porsche Cayenne Residual Pressure Holding Valve / Gas Nozzle Rear For 95535872000
|Type||Air suspension spring||Model NO.||501015G|
|Position||Rear Left||Warranty||One year|
|Rubber type||Natural rubber||Place of origin||Guangzhou China(main land)|
|Manufacturer part NO.||95535872000, 95535872002||Year||
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
This Residual Pressure Holding Valve / Gas Nozzle fit for the following:
1. GUOMAT Rear Air Spring for 2003-2010 (all, w/ air suspension) Cayenne 95535872000,
2. GUOMAT Rear Air Spring for 2004-2010 (all, w/ air suspension) Touareg 95535872002
3. GUOMAT Rear Air Spring for 2007-2015 (all w/ air suspension) Q7 95535872002
4. PORSCHE - Cayenne 2003-2010 (all, w/ air suspension)
5. VOLKSWAGEN - Touareg 2004-2010 (all, w/ air suspension)
6. AUDI - Q7 2007-2015 (all w/ air suspension)
Q7 (4L) , 3.0 TDi , 3.0 TDSi , 3.6 FSi , 4.2 FSi , 4.2 TDi , 6.0 TDi
Cayenne (955) , 3.2 , 3.6 , GTS 4.8 , S4.5 , S4.8 , Turbo 4.5 , Turbo S 4.5 , Turbo S 4.8
Touareg 7LA 7L6 7L7 2004 à 2010 , 2.5 R5 TDi , 3.0 TDi , 3.2 V6 , 3.6 V6 FSi , 4.2 V8 , 5.0 R50 TDi , 6.0 W12
The 8 steps to install a New Air Spring on Your Vehicle
Replacing a broken air spring may require the help of a mechanic, but you can cut down your expenses by simply installing it yourself.
1: Parking your car on a level surface then using the floor jack to lift it up. Place the jack stands underneath the vehicle for support.
2: Remove the wheels by detaching its lug nuts one by one. Use a wrench for this procedure.
3: Deflate the air spring by opening the air mouth on the top.
4: Detach the set of fasteners that secure the air spring in place. You can generally find these bolts on the control arm and under the hood. Keep in mind that the set of procedures for removing an air spring vary for each car, so make it a point to consult your owner's manual to see exactly how yours is removed.
5: Remove the old air spring away from the shock carefully. If needed, use a spring compressor to make the remove easier. You may reuse the O rings connecting the air spring to the shock.
6: Put the new air spring on the place where you removed the old one.
7: Reconnect it to the shock using the O rings you removed earlier. Make sure you apply lubricant on them before putting them back.
8: Reattach all the components that you removed. Recheck if there are no missing bolts, nuts and fittings.
Contact Person: Linda Lin