37126750355 Suspension Air Spring Bag Left Rear BMW X5 One Year Warranty

BMW X5 Suspension Air Bag 37126750355 Suspension Air Spring Left Rear

Specifications

Other Part Number:

bmw E53 3.0D sport 2001 auto, 37 12 6 750 355 , 37126750355

This item can fit for the following vehicles:

BMW Suspension Air Springs

How to know the right and left of the parts I need?

The right and left sides of an automobile are determined as if sitting in the car facing forward. Thus, the left side is on the left when sitting in the car facing forward, and the right side is on the right. For American cars, the driver side is on the left, and the passenger sits to the right of the driver. For cars in Japan, Britain, Ireland, the Bahamas and some other former British colonies -- where they drive on the left side of the road -- the passenger sits on the left side, and the driver (along with all the driving controls) is on the right.

The 8 steps to install a New Air Spring on Your Vehicle

Replacing a broken air spring may require the help of a mechanic, but you can cut down your expenses by simply installing it yourself.

1: Parking your car on a level surface then using the floor jack to lift it up. Place the jack stands underneath the vehicle for support.

2: Remove the wheels by detaching its lug nuts one by one. Use a wrench for this procedure.

3: Deflate the air spring by opening the air mouth on the top.

4: Detach the set of fasteners that secure the air spring in place. You can generally find these bolts on the control arm and under the hood. Keep in mind that the set of procedures for removing an air spring vary for each car, so make it a point to consult your owner's manual to see exactly how yours is removed.

5: Remove the old air spring away from the shock carefully. If needed, use a spring compressor to make the remove easier. You may reuse the O rings connecting the air spring to the shock.

6: Put the new air spring on the place where you removed the old one.

7: Reconnect it to the shock using the O rings you removed earlier. Make sure you apply lubricant on them before putting them back.

8: Reattach all the components that you removed. Recheck if there are no missing bolts, nuts and fittings.